HD18MS Bulldozer
Model | HD18MS |
Dimension | 5925 x 4410 x 3055 |
Weight | 21000kg |
Engine Model | WP10G178E355 or WD10G200E25 |
Engine Type | Water cooling, inline, 4 stroke, direct injection |
Engine Cylinder Number | 6 |
Cylinder Bore and Stroke | Φ126 x 130mm |
Engine Piston Displacement | 9.726L |
Engine Rated Power | 131kw @1850rpm |
Engine Max Torque | 830/1000-1200NM/rpm |
Engine Min Oil Consumption | 214g/kwh |
Carrier roller QTY | 3 each side |
Weight Bearing Roller QTY | 9 each side |
Caterpillar board QTY | 49 each side |
Caterpillar type | Triangle gear assembled |
Caterpillar width | 1200mm |
Caterpillar center distance | 2300mm |
Caterpillar piece length | 203.2mm |
Hydraulic System Displacement | 227L/min |
Blade Max Working Depth | 510mm |
Blade Width | 4410mm |
Blade Height | 972mm |
Earth Contacting Pressure | 0.021Mpa |
Travel Speed Gear | 1st | 2nd | 3rd | 4th | 5th |
Move Forward | 0-2.67km/h | 0-3.76km/h | 0-5.41km/h | 0-7.62km/h | 0-11.3km/h |
Move Reverse | 0-3.48km/h | 0-4.9km/h | 0-7.05km/h | 0-9.92km/h | - |
Transmission System Figure
Center Drive Shaft | Spiral bevel gear, single stage speed reduction, splash lubrication |
Steering Clutch | Wet, multi disc, spring loaded, manual hydraulic seperated, inter linked with steering brake |
Steering Brake | Wet type, floating band structure, foot brake, hydraulic booster |
Final Drive | Spur gear 2 stage speed reduction, splash lubrication |
Transmission Box | Manual operation, forced lubrication |