After the cattle halves are chilled at the chilling room, they will be transferred to the deboning and cutting room for further processing. These halves will be cut into quarters, and these quarters will be transferred to the cutting working positions again and then cut into small pieces.
The quarters cutting lifting machine will help with the transferring to reduce the worker labor.
This machine can also used as the lowerator for quarters if it is installed in the opposite direction.
General Introduction
This machine is used to lift the cattle carcass lifting for four parts cutting, after acid remova in the cooling room.
Technical parameters
Power:1.1KW
Lifting capacity:1000KG
Lifting height:3m
Lifting speed:8mm/min
voltage:380Vac
Controlling voltage:24Vdc
Maintenance
Check the steel wires for angle turn or spines, replace the gear box oil on time.